For Headphone Users
NOTE: Certain in-canal earphone models may require the use of the yurAdapaters™.

Step 1 / Image 1 and 2
LOCATE THE "R" (FOR RIGHT) ON YURBUD™ and slip it over your right earphone so it is wrapped snugly around the the entire earphone. Repeat the same step for your left earphone.

Step 2 / Image 3
RIGHT YURBUD: Hold your right earphone in your hand so the stem is straight up and down (vertical). With your other hand take your right yurbud™ and place the large opening over your earphone. Now rotate the yurbud™ so that the small sound tunnel opening at the bottom of the yurbud™ faces slightly inward (at an 8 o'clock position) in relation to the vertical earphone stem.

LEFT YURBUD: Hold your left earphone in your hand so the stem is straight up and down (vertical). With your other hand take your left yurbud™ and place the large opening over your earphone. Now rotate the yurbud™ so that the small sound tunnel opening at the bottom of the yurbud™ faces slightly inward (a 4 o'clock position) in relation to the vertical earphone stem.

NOTE: These are the recommended placement for yurbuds™. Once you try on yurbuds™ you may wish to adjust the position to match you personal preference.

Step 3 / Image 4
PUTTING ON YURBUDS™: To use yurbuds™ bring the sound tunnel (small opening on the yurbud) toward your ear canal at a slightly downward angle and insert the end in your ear canal, then gently push the back of the yurbud towards the back of your ear until it fits snugly against your ear. Adjust for comfort.

For Bluetooth® Users
NOTE: Certain Bluetooth® models require the use of one of the yurAdapaters™.

HOLD YOUR BLUETOOTH® DEVICE VERTICALLY.

RIGHT EAR: With your other hand take your right yurbud™ and place the large opening over your earpiece. Now rotate the yurbud™ so that the small sound tunnel opening at the bottom of the yurbud™ faces slightly inward (a 4 o'clock position) in relation to the vertical Bluetooth® device.

LEFT EAR: With your other hand take your left yurbud™ and place the large opening over your earpiece. Now rotate the yurbud™ so that the small sound tunnel opening at the bottom of the yurbud™ faces slightly inward (a 8 o'clock position) in relation to the vertical Bluetooth® device.

Please follow the Step 3 / Image 4 instructions above to put on yourbuds™

NOTE: These are the recommended placement for yurbuds™. Once you try on yurbuds™ you may wish to adjust the position to match you personal preference.

yurbuds™ sound-enhancing earbud adapters are constructed from medical grade soft silicone rubber, which offers the multiple benefits of high quality, durability and comfort.

yurbuds™ are easy to care for! To clean:

• yurbud™ Interior and Exterior: Soak the yurbud™ in warm soapy water. Rinse with warm water. Gently squeeze excess water out from inside of the yurbud™ and allow to air dry for two hours.
• Adapter Exterior Only: The exterior of the adapter can be cleaned with a non-alcoholic disinfectant wipe. Allow to air dry.